Automatic PE Enveloping Machine for Big Batteries

Apply to enveloping plates for car batteries, Such as 12V45Ah,65Ah,80Ah etc…

 PLC control system, touchable the man-machine interface.  Single feeding rack, feeding motor worked automatically according to the detection of photoelectric signal, automatic feeding.  Set the length of PE follow plat’s size, the machine Automatic measuring PE’s length and automatic cutting.  The cutting position can be adjusted up & down, change mould for center line of PE Separator  According to the size of the plate, the width of the horizontal transfer track can be adjusted; According to the width of the PE, the width of the PE transfer track can be adjusted; Model change can be completed within 15 minutes, especially suitable for multi-specification battery enveloping plate in one machine.  The machine is equipped with two sets suction plate system, 2 set Positive conveyor adopts parallel feeding, feeding balance, stability, neat, lack of plate alarm.  Set the number of positive plates and negative plates freely, Such as 2+/2- ,3+/3-.......8+/8- etc…; The plate group conveying adopts the non-slip chain transmission with fill group alarm on the conveyor.  Fully closed design, exhaust system in the lower part of the machine, Can better to collecting lead dust and effective protection electronic components.  The machine is equipped with automatic alarm security system, and meet safety gate was opened, the machine automatic stop.  The equipment is equipped with centrifugal pump suction plate system with dust filter, It can be removed and cleaned; The machine has suction plate detection function.  The machine is equipped with automatic alarm security system, and meet the alarm, will automatically alert, and automatic stop immediately and display the alarm information on the man-machine interface; The machine is equipped with functional button switches such as start, stop and reset etc….  The machine is equipped with automatic mode and Manual mode etc…  The machine can automatically record the effective working time, failure time, failure times and qty.  Users can choose left - out models or right - out models according to the production line